 |
 |
 |
|
| |
|
| |
| |
MSW-136 (A) ICE FLAKING MACHINE “MAC” |
| |
- Outer body is made of STAINLESS STEEL SHEET, buffed to mirror finish.
- Inner chamber and lid of storage bin are made up of stainless steel and the unit is insulated with PUFF for minimal thermal losses.
- It requires plain tap water connection.
- Ice flakes coming out from the crushing assembly only within 25 minutes and are collected in a collecting bin for ready use.
- Continuous availability of Ice Flakes till the machine is on.
- Unit gets automatically cut off when the collecting bin is full of ice flakes thereby saving the power consumption.
- Collecting bin is fully insulated with 'PUF' which prevents melting of ice flakes.
- Indigenously designed and manufactured unit with INDIAN components which are readily available for replacement.
- Well balanced refrigeration system with hermetic sealed compressor, condenser, fan motor assembly & NON-CFC R134 (a) gas to cool the crusher assembly for producing ice.
- Crusher assembly is made of Stainless Steel and is driven by heavy duty induction motor coupled to reduction gear.
- Crusher assembly is supplied with water from in-built water collecting tank, which is fitted with a float valve for regulating water supply.
- Drain at the bottom of the collecting tank is also provided.
- CFC FREE ECO-FRIENDLY COMPRESSOR.
|
|
|
| |
|
CAPACITY |
STORAGE BIN CAPACITY |
|
| |
(a) |
15 kgs/ 24 hrs |
10 kw
|
|
| |
(b) |
50 kgs/ 24 hrs |
30 kw
|
|
| |
(c) |
100 kgs/ 24 hrs |
50 kw
|
|
|
| |
MSW-136 (B) ICE CUBE MAKING MACHINE “MAC” |
| |
- Body made of stainless steel the units are fitted with hermetically seated compressor for high capacity cooling.
- All units are controlled through a highly sensitive temperature control unit.
- Double walled storage bin are insulated with PUFF for minimal thermal losses.
- NO USE OF PUMPS : No disturbance, repair, wear.
- NO NOZZLE: No lime deposition in the ice preparation system. No Disturbance, No spraying noise.
- NO STEERING DEVICE: No Breakage of the paddles, No noise caused by paddles.
- NO HEATING GRIDS : Low power consumption, No source of deficiencies.
- AUTOMATIC DRAINAGE OF RESIDUAL WATER AFTER EACH ICE PRODUCTION CYCLE: No concentration of minerals and impurities, clear hygienic ice cubes.
- DRAINAGE OF THE RESIDUAL WATERVIA SEPARATE DRAIN GUTTER: No contact with already produced ice cubes in the storage bin.
- FULLY INSULATED AND SEALED ICE PRODUCTION SYSTEM : No loss of cooling,
- Low electricity consumption, Hygienic ice production as no impurities can penetrate in the system.
- PUFF INSULATED BINS MADE OF S.S. : Very less ice melting.
- To work in 220/230 VA.C. Supply.
|
|
|
| |
|
|
|
|
|
|
| |
(a) |
|
12 ltrs |
0.3 kw | |
|
| |
(b) |
|
30 ltrs |
0.4 kw | |
|
| |
(c) |
|
60 ltrs |
0.5 kw | |
|
| |
(d) |
|
90 ltrs |
1.00 kw | |
|
|
| |
MSW-136 (C) ICE CUBE CRUSHING MACHINE “MAC” |
| |
(a)
|
Most useful for crushing ready ice cubes into ice flakes the body is made of stainless steel.
|
- The unit operates through an electric motor to work in 220/ 230 Volts A.C. Supply.
- Fitted with special “GERMAN” crushing blades.
- Production capacity of approx 100 kg/hour (Rating: 100 Watts). Without storage bin.
| (b) |
-do- same as part (a) but with PUF insulated storage bin to store upto 10kgs of crushed ice. |
| (c) |
-do- same as part (a) above but HAND OPERATED with crushing capacity of approx. 20 kg/hour
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
 |
|
 |
|
|
|
|
.jpg)
.jpg)
.png)
.jpg')){kind=link}
){kind=link}
){kind=link}